UPS Accessories - Software and Hardware
PowerShield3 UPS Monitoring Software
UPS monitoring and control software to provide efficient, user-friendly UPS remote management.
PowerNetGuard Monitoring Software
UPS monitoring and control software using SNMP communications to central UPS management over a wide network.
UPS SNMP management agent (101 boxed, 102 internal UPS card).
Environmental sensors for temperature and humidity.
A protocol converter to allow UPS monitoring using MODBUS/JBUS on RS232 or RS485 serial lines.
A serial duplexer allowing two devices to be connected to a single UPS device.
An internal card to provide a UPS with an additional RS232 serial interface or USB port.
Similar to the MultiCom 362 but with Emergency Power Off (EPO) and Remote Shut Down (RSD) input terminals.
An internal card to provide a UPS with a set of relay contacts for EPO, RSD, On Battery, On Bypass, Alarm and Low Battery.
An internal card with configurable input and output signal contacts.
An external communications accessories to allow a UPS to be monitored using Profibus.
A UPS accessory to convert an RS232-port for USB connection.
Interface Cable Kits
Preconfigured remote monitoring interface cable kits for IBM AS/400 and i-Series systems.
Remote monitoring panels to provide UPS status overview and interrogation.
External maintenance bypasses with sockets (power rating dependent) or hardwired to allow a UPS to be powered down and removed without interruption to a load.