SNMP Interfaces, USB Converters and MultiPlexers

The Riello UPS software design team also produces a wide range of Simple Network Management Protocol (SNMP) adapters, USB converters, duplexers and protocol converters to expand the communications capabilities of Riello UPS and provide ease of management across networks and multi operating platfforms.

Many of these devices have been generated to respond to specific customer projects.

NETMAN 101/102

The NetMan network agent allows UPS management across a LAN using any of the main network communication protocols - TCP/IP, HTTP and network interface (SNMP). NetMan enabled UPS integrate easily into medium and large sized networks and provide reliable communications between the UPS and management systems employed.

configured via TELNET or a serial terminal
compatible with PowerShield and PowerNETGuard monitoring and control software
integrated Web server for browser-based display
Telenetguard modem compatible
firmware upgradeable through the serial port.
support's the network interface (SNMP) standard communication protocol with proprietary RFC 1628 and MIB

MULTICOM 301/302

The MultiCOM 301/302 protocol converter may be used to monitor the UPS using the MODBUS/JBUS protocol on RS485 or RS232 serial lines. It will also manage a second, independent RS232 serial line that can be used to connect other devices such as the Netman 101 or a PC that uses the PowerShield software.

configuration of the port for MODBUS/JBUS as RS232 or RS485
management of two independent serial lines
suitable for integration with Building Management Systems (BMS)
LED signaling of the communication flow
firmware upgrade able through the serial port.

MULTICOM 351/352

The MultiCom 351/352 is a serial duplexer that allows two devices to be connected to a single serial port on a UPS. It can be used where numerous serial connections and multiple polling of UPS are required, and is ideal for LAN networks with a firewall.

cascading configuration giving a maximum of 4 serial ports
LED signaling of the communication flow
firmware upgrade able through the serial port.

MULTI I/O

The Multi I/O device integrates the UPS with control systems with complete configurability of the input and output signals.

8 analog/digital inputs
8 relay outputs configured using the UPS and input status
may communicate with the UPS via RS-232
can control 2 independent serial lines RS232/RS485 to monitor the UPS and the device itself with the Modbus/Jbus protocol.

USB Converter

The RS232-USB converter allows UPS without a USB port to connect to Macintosh, Windows and linux PCs with this type of port.